Clover Imaging Remanufactured Yellow Ink Cartridge for HP 935 (C2P22AN)

  • HP - C2P22AN
  • HP - C2P22AN
  • HP - C2P22AN
  • Additional image
  • Additional image
  • Additional image

Clover Imaging Remanufactured Yellow Ink Cartridge for HP 935 (C2P22AN)

  • 118082
  • Inkjet
  • HP - C2P22AN
  • 935
  • Yellow
  • 400 Pages *

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be contacted about purchasing Clover products.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information

Technical Specifications

Compatible with following printers:

HP
  • Officejet 6220
  • Officejet 6230
  • Officejet 6812
  • Officejet 6815
  • Officejet Pro 6820
  • Officejet Pro 6830
  • Officejet Pro 6835

Product Box Dimensions:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.2 lbs

Videos and Downloads

Product Related Videos:

  • High Quality - Environmentally Friendly Inkjet Printer Cartridges

Product Related Downloads:

Product Troubleshooting

Possible Troubleshooting

If you have received an error message stating Ink Cartridge Problem or Ink Cartridge Failure, we apologize for the inconvenience. HP has issued a firmware update that affects certain printer models.

Ink Cartridge Problem

Ink Cartridge Failure

If you think you have experienced issues with your cartridges because of the recent HP firmware update, there is a solutions to correct this issue:

1. Download and install the new firmware from HP’s website. You may do so by clicking on your printer model below to link directly to this download


Upon completion of installing this download your cartridges will continue working.

If this does not correct the error message, please contact your provider for further assistance.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Please also gently pull the tab on the front of the cartridge to help the cartridge fit into the printer properly.

Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • Gently pull the colored tab on the front of the cartridge.
  • Reinstall the cartridge, and you should hear it "click" into place. Follow any on-screen prompts that may appear. 

If you still receive a recognition error after installation, please remove the problem cartridge and confirm that there is a chip intact.

To locate the chip, look at the bottom of the cartridge.

If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris.
  • Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and encounter the same error, there is most likely an electrical problem with the cartridge; and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine. (The color of the cartridge may be different, but the shape should be the same.)



Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to remove the pull tab from the top of the cartridge.

Next make sure you have properly removed the plastic band and clip from the cartridge. The clip protects the nozzle on the cartridge and also keeps the cartridge from leaking.

Once the clip has been removed, confirm that the chip is in place on the cartridge. Now your cartridge is ready to be installed into your printer. 

If the cartridge still does not fit into your printer, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you notice that the ink gauge displays low or no ink level, do not be alarmed - this is very common for a remanufactured inkjet.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the bottom of the cartridge.

If the chip is gold, it is likely the original chip and will not display a correct ink level.

If the chip is a different color (such as green), the ink level should register correctly; but you may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle. You should now see an ink level.

If the chip is gold (or a different color other than green), the ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge; but this message can be bypassed easily, when necessary, and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an estimate of how much ink may be remaining in the cartridge.

To continue printing, click ok or continue through any printer prompts, if applicable, to allow the printer to finish printing.

Or you may press ok on your printer’s LCD screen, if it has one.

If you do not see an option to bypass the low ink message, please click here for an example of what to look for on your printer.

If you have attempted this troubleshooting and are still not able to print, there may be a problem with the cartridge and you should contact the place of purchase.

Ink System Failure

The error shown below most often indicates that a printhead or printheads in your machine need to be replaced. If powering the printer off and then on again did not eliminate the error, removing all of the cartridges and reinstalling them may resolve the issue.

If you still receive the error message after completing these steps, you should replace the printhead(s). Please consult your printer's user manual (or the OEM website) for instructions on how to change the printhead in your machine and the suggested maintenance for your printer.

Please note that printheads are a consumable item. They may need to be replaced periodically throughout the life of your printer to ensure the best printing quality.

Ink System Failure

The error pictured above may not look identical to yours, but the same information applies to the cartridge you have chosen to troubleshoot.

If you encounter a pop-up screen containing information about HP's Cartridge Protection Feature asking you if you would like to discourage theft and counterfeiting by protecting your HP cartridge, select "No".

Cartridge Protection

If you selected “Yes” in error, you may see a second screen asking you to enable or disable HP Cartridge Protection.

Select “Disable HP Cartridge Protection” then “Save Setting” and close.

Disable Cartridge Protection

  



You may encounter an error stating that "HP's ink cartridge and printer warranties do not cover repairs or service due to the use of non-HP cartridges or non-HP ink" or an error stating "Counterfeit Cartridge Advisory".

It is important to note that most remanufactured inkjet cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.

In order to continue or begin using your printer, click OK or Continue to dismiss the printer prompts that appear on your screen after installing the remanufactured cartridges. Do not click "Cancel".

This message may reappear prior to the depletion of your cartridge. Please follow the same procedure to dismiss the message if this does occur.

If you did click "Cancel", click here for more information.

Your rights as a consumer are protected under the Magnuson-Moss Warranty Federal Trade Commission Improvement Act, Subparagraph C, Section 101.

"The use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer."

Please click here for more information
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

You may encounter an error stating that "HP's ink cartridge and printer warranties do not cover repairs or service due to the use of non-HP cartridges or non-HP ink" or an error stating "Counterfeit Cartridge Advisory".

It is important to note that most remanufactured inkjet cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.

In order to continue or begin using your printer, click OK or Continue to dismiss the printer prompts that appear on your screen after installing the remanufactured cartridges. Do not click "Cancel".

This message may reappear prior to the depletion of your cartridge. Please follow the same procedure to dismiss the message if this does occur.

If you did click "Cancel", click here for more information.

Your rights as a consumer are protected under the Magnuson-Moss Warranty Federal Trade Commission Improvement Act, Subparagraph C, Section 101.

"The use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer."

Please click here for more information How to respond to Warranty messages 

Missing or Failed Printhead

If you experience the error shown below, please turn your printer off and then back on again. This should clear the error.

If the error persists, please consult your printer's user manual regarding printhead maintenance. Please note that printheads are a consumable item. They may need to be replaced periodically throughout the life of your printer to ensure the best printing quality.

Missing or Failed Printhead

The error pictured above may not look identical to yours, but the same information applies to the cartridge you have chosen to troubleshoot.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have removed the pull tab, plastic band and clip from the cartridge but it does not "snap" into place, there is a simple solution to fix this.

  • Gently pull the colored tab on the front of the cartridge. 
  • Reinstall the cartridge, and you should hear it "click" into place. 
  • Follow any on-screen prompts that may appear. 

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

Please visit our Printer Compatibility page to determine which cartridge you need for your machine. 
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • Gently pull the colored tab on the front of the cartridge.
  • Reinstall the cartridge, and you should hear it "click" into place. Follow any on-screen prompts that may appear. 

If you still receive a recognition error after installation, please remove the problem cartridge and confirm that there is a chip intact.

To locate the chip, look at the bottom of the cartridge.

If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris.
  • Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and encounter the same error, there is most likely an electrical problem with the cartridge; and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have attempted to print a document but nothing prints on the page, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the cartridge is still not printing, you may need to clean any excess adhesive from the top of the cartridge.

  • Look at the top of the cartridge. Just above the cartridge label, you should see a “T”. 
  • Using a pen or a pencil, remove any obstruction or debris from the “T”. This will allow ink to flow freely from the cartridge once installed into the printer. 
  • Once this has been done and the cartridge has been reinstalled into your printer, please attempt your print again. 

If the cartridge still does not print after cleaning the "T", please remove the product label. Once the product label is removed, you should be able to view the entire air vent (it looks like a channel of curvy lines). This should give the cartridge the proper air flow that it needs in order to continue printing.

If the cartridge still does not print or prints poorly after completing these steps, you may need to perform a cleaning cycle in order to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer’s LCD or touch screen. If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • Using the arrow keys, scroll to and select Setup 
  • Select Tools 
  • Scroll down, if necessary, and select Clean Printhead 
  • Your printer will now perform a cleaning cycle 
  • When the cleaning cycle is complete a test page will print. 
  • If the quality on the test page is satisfactory, you may return to the document you wish to print and resume printing. 
  • If the print quality is still unsatisfactory, you may perform another cleaning cycle. 

Please be aware that cleaning cycles consume a fair amount of ink and should only be performed when necessary.

If you are not satisfied with the print quality after two or three consecutive cleaning cycles, the cartridge may be defective and need to be returned to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have attempted to print a document but nothing prints on the page, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the cartridge is still not printing, you may need to clean any excess adhesive from the top of the cartridge.

  • Look at the top of the cartridge. Just above the cartridge label, you should see a “T”. 
  • Using a pen or a pencil, remove any obstruction or debris from the “T”. This will allow ink to flow freely from the cartridge once installed into the printer. 
  • Once this has been done and the cartridge has been reinstalled into your printer, please attempt your print again. 

If the cartridge still does not print after cleaning the "T", please remove the product label. Once the product label is removed, you should be able to view the entire air vent (it looks like a channel of curvy lines). This should give the cartridge the proper air flow that it needs in order to continue printing.

If the cartridge still does not print or prints poorly after completing these steps, you may need to perform a cleaning cycle in order to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer’s LCD or touch screen. If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • Using the arrow keys, scroll to and select Setup 
  • Select Tools 
  • Scroll down, if necessary, and select Clean Printhead 
  • Your printer will now perform a cleaning cycle 
  • When the cleaning cycle is complete a test page will print. 
  • If the quality on the test page is satisfactory, you may return to the document you wish to print and resume printing. 
  • If the print quality is still unsatisfactory, you may perform another cleaning cycle. 

Please be aware that cleaning cycles consume a fair amount of ink and should only be performed when necessary.

If you are not satisfied with the print quality after two or three consecutive cleaning cycles, the cartridge may be defective and need to be returned to the place of purchase.

If you encounter an error message stating "User Intervention Required", there may be a simple solution to fix this.

  • Restart both your printer and computer and attempt your print again

If that does not resolve the error, please try to clear the Print Spooler:

  • Search Windows for Services, and then click Services in the list of results. (The Search Bar can be found by clicking the Windows button in the lower left corner of the screen.)
  • Select Print Spooler from the alphabetical list.
  • Right-click Print Spooler and choose "Stop".
Next close the Services window and use Windows Explorer to go to C:\Windows\System32\Spool\PRINTERS.

  • Open Windows Explorer (the icon that looks like a file folder).
  • Select the (C:) drive in the left pane under "Computer".
  • Double-click the Windows folder.
  • Scroll down and open the "System32" folder.
  • Open the "spool" folder and delete all files inside the PRINTERS folder.
  • Restart your computer and attempt your print again 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing".

To determine whether the chip on your cartridge has been replaced, locate the chip on the bottom of the cartridge.

If the chip is gold and has notches at one end, it is likely the original chip (which means that it may not display a correct ink level).

If the chip is a different color (such as green) or is gold with no notches, the chip has been replaced (which means that the ink level should register correctly).



The cartridges pictured above may not look identical to yours, but the same information applies to the cartridge you have chosen to troubleshoot.

If you have received an error message stating Ink Cartridge Problem or Ink Cartridge Failure, we apologize for the inconvenience. HP has issued a firmware update that affects certain printer models.

Ink Cartridge Problem

Ink Cartridge Failure

If you think you have experienced issues with your cartridges because of the recent HP firmware update, there is a solutions to correct this issue:

1. Download and install the new firmware from HP’s website. You may do so by clicking on your printer model below to link directly to this download


Upon completion of installing this download your cartridges will continue working.

If this does not correct the error message, please contact your provider for further assistance.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Please also gently pull the tab on the front of the cartridge to help the cartridge fit into the printer properly.

Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • Gently pull the colored tab on the front of the cartridge.
  • Reinstall the cartridge, and you should hear it "click" into place. Follow any on-screen prompts that may appear. 

If you still receive a recognition error after installation, please remove the problem cartridge and confirm that there is a chip intact.

To locate the chip, look at the bottom of the cartridge.

If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris.
  • Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and encounter the same error, there is most likely an electrical problem with the cartridge; and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine. (The color of the cartridge may be different, but the shape should be the same.)



Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to remove the pull tab from the top of the cartridge.

Next make sure you have properly removed the plastic band and clip from the cartridge. The clip protects the nozzle on the cartridge and also keeps the cartridge from leaking.

Once the clip has been removed, confirm that the chip is in place on the cartridge. Now your cartridge is ready to be installed into your printer. 

If the cartridge still does not fit into your printer, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you notice that the ink gauge displays low or no ink level, do not be alarmed - this is very common for a remanufactured inkjet.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the bottom of the cartridge.

If the chip is gold, it is likely the original chip and will not display a correct ink level.

If the chip is a different color (such as green), the ink level should register correctly; but you may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle. You should now see an ink level.

If the chip is gold (or a different color other than green), the ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge; but this message can be bypassed easily, when necessary, and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an estimate of how much ink may be remaining in the cartridge.

To continue printing, click ok or continue through any printer prompts, if applicable, to allow the printer to finish printing.

Or you may press ok on your printer’s LCD screen, if it has one.

If you do not see an option to bypass the low ink message, please click here for an example of what to look for on your printer.

If you have attempted this troubleshooting and are still not able to print, there may be a problem with the cartridge and you should contact the place of purchase.

Ink System Failure

The error shown below most often indicates that a printhead or printheads in your machine need to be replaced. If powering the printer off and then on again did not eliminate the error, removing all of the cartridges and reinstalling them may resolve the issue.

If you still receive the error message after completing these steps, you should replace the printhead(s). Please consult your printer's user manual (or the OEM website) for instructions on how to change the printhead in your machine and the suggested maintenance for your printer.

Please note that printheads are a consumable item. They may need to be replaced periodically throughout the life of your printer to ensure the best printing quality.

Ink System Failure

The error pictured above may not look identical to yours, but the same information applies to the cartridge you have chosen to troubleshoot.

If you encounter a pop-up screen containing information about HP's Cartridge Protection Feature asking you if you would like to discourage theft and counterfeiting by protecting your HP cartridge, select "No".

Cartridge Protection

If you selected “Yes” in error, you may see a second screen asking you to enable or disable HP Cartridge Protection.

Select “Disable HP Cartridge Protection” then “Save Setting” and close.

Disable Cartridge Protection

  



You may encounter an error stating that "HP's ink cartridge and printer warranties do not cover repairs or service due to the use of non-HP cartridges or non-HP ink" or an error stating "Counterfeit Cartridge Advisory".

It is important to note that most remanufactured inkjet cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.

In order to continue or begin using your printer, click OK or Continue to dismiss the printer prompts that appear on your screen after installing the remanufactured cartridges. Do not click "Cancel".

This message may reappear prior to the depletion of your cartridge. Please follow the same procedure to dismiss the message if this does occur.

If you did click "Cancel", click here for more information.

Your rights as a consumer are protected under the Magnuson-Moss Warranty Federal Trade Commission Improvement Act, Subparagraph C, Section 101.

"The use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer."

Please click here for more information
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

You may encounter an error stating that "HP's ink cartridge and printer warranties do not cover repairs or service due to the use of non-HP cartridges or non-HP ink" or an error stating "Counterfeit Cartridge Advisory".

It is important to note that most remanufactured inkjet cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.

In order to continue or begin using your printer, click OK or Continue to dismiss the printer prompts that appear on your screen after installing the remanufactured cartridges. Do not click "Cancel".

This message may reappear prior to the depletion of your cartridge. Please follow the same procedure to dismiss the message if this does occur.

If you did click "Cancel", click here for more information.

Your rights as a consumer are protected under the Magnuson-Moss Warranty Federal Trade Commission Improvement Act, Subparagraph C, Section 101.

"The use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer."

Please click here for more information How to respond to Warranty messages 

Missing or Failed Printhead

If you experience the error shown below, please turn your printer off and then back on again. This should clear the error.

If the error persists, please consult your printer's user manual regarding printhead maintenance. Please note that printheads are a consumable item. They may need to be replaced periodically throughout the life of your printer to ensure the best printing quality.

Missing or Failed Printhead

The error pictured above may not look identical to yours, but the same information applies to the cartridge you have chosen to troubleshoot.

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have removed the pull tab, plastic band and clip from the cartridge but it does not "snap" into place, there is a simple solution to fix this.

  • Gently pull the colored tab on the front of the cartridge. 
  • Reinstall the cartridge, and you should hear it "click" into place. 
  • Follow any on-screen prompts that may appear. 

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

Please visit our Printer Compatibility page to determine which cartridge you need for your machine. 
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

  • Begin by removing the cartridge that is causing the error from its cradle. 
  • Gently pull the colored tab on the front of the cartridge.
  • Reinstall the cartridge, and you should hear it "click" into place. Follow any on-screen prompts that may appear. 

If you still receive a recognition error after installation, please remove the problem cartridge and confirm that there is a chip intact.

To locate the chip, look at the bottom of the cartridge.

If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris.
  • Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and encounter the same error, there is most likely an electrical problem with the cartridge; and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have attempted to print a document but nothing prints on the page, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the cartridge is still not printing, you may need to clean any excess adhesive from the top of the cartridge.

  • Look at the top of the cartridge. Just above the cartridge label, you should see a “T”. 
  • Using a pen or a pencil, remove any obstruction or debris from the “T”. This will allow ink to flow freely from the cartridge once installed into the printer. 
  • Once this has been done and the cartridge has been reinstalled into your printer, please attempt your print again. 

If the cartridge still does not print after cleaning the "T", please remove the product label. Once the product label is removed, you should be able to view the entire air vent (it looks like a channel of curvy lines). This should give the cartridge the proper air flow that it needs in order to continue printing.

If the cartridge still does not print or prints poorly after completing these steps, you may need to perform a cleaning cycle in order to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer’s LCD or touch screen. If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • Using the arrow keys, scroll to and select Setup 
  • Select Tools 
  • Scroll down, if necessary, and select Clean Printhead 
  • Your printer will now perform a cleaning cycle 
  • When the cleaning cycle is complete a test page will print. 
  • If the quality on the test page is satisfactory, you may return to the document you wish to print and resume printing. 
  • If the print quality is still unsatisfactory, you may perform another cleaning cycle. 

Please be aware that cleaning cycles consume a fair amount of ink and should only be performed when necessary.

If you are not satisfied with the print quality after two or three consecutive cleaning cycles, the cartridge may be defective and need to be returned to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.

If you have attempted to print a document but nothing prints on the page, first ensure that you have removed the pull tab from the top of the cartridge.

If you have already removed the pull tab and the cartridge is still not printing, you may need to clean any excess adhesive from the top of the cartridge.

  • Look at the top of the cartridge. Just above the cartridge label, you should see a “T”. 
  • Using a pen or a pencil, remove any obstruction or debris from the “T”. This will allow ink to flow freely from the cartridge once installed into the printer. 
  • Once this has been done and the cartridge has been reinstalled into your printer, please attempt your print again. 

If the cartridge still does not print after cleaning the "T", please remove the product label. Once the product label is removed, you should be able to view the entire air vent (it looks like a channel of curvy lines). This should give the cartridge the proper air flow that it needs in order to continue printing.

If the cartridge still does not print or prints poorly after completing these steps, you may need to perform a cleaning cycle in order to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer’s LCD or touch screen. If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • Using the arrow keys, scroll to and select Setup 
  • Select Tools 
  • Scroll down, if necessary, and select Clean Printhead 
  • Your printer will now perform a cleaning cycle 
  • When the cleaning cycle is complete a test page will print. 
  • If the quality on the test page is satisfactory, you may return to the document you wish to print and resume printing. 
  • If the print quality is still unsatisfactory, you may perform another cleaning cycle. 

Please be aware that cleaning cycles consume a fair amount of ink and should only be performed when necessary.

If you are not satisfied with the print quality after two or three consecutive cleaning cycles, the cartridge may be defective and need to be returned to the place of purchase.

If you encounter an error message stating "User Intervention Required", there may be a simple solution to fix this.

  • Restart both your printer and computer and attempt your print again

If that does not resolve the error, please try to clear the Print Spooler:

  • Search Windows for Services, and then click Services in the list of results. (The Search Bar can be found by clicking the Windows button in the lower left corner of the screen.)
  • Select Print Spooler from the alphabetical list.
  • Right-click Print Spooler and choose "Stop".
Next close the Services window and use Windows Explorer to go to C:\Windows\System32\Spool\PRINTERS.

  • Open Windows Explorer (the icon that looks like a file folder).
  • Select the (C:) drive in the left pane under "Computer".
  • Double-click the Windows folder.
  • Scroll down and open the "System32" folder.
  • Open the "spool" folder and delete all files inside the PRINTERS folder.
  • Restart your computer and attempt your print again 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing".

To determine whether the chip on your cartridge has been replaced, locate the chip on the bottom of the cartridge.

If the chip is gold and has notches at one end, it is likely the original chip (which means that it may not display a correct ink level).

If the chip is a different color (such as green) or is gold with no notches, the chip has been replaced (which means that the ink level should register correctly).



The cartridges pictured above may not look identical to yours, but the same information applies to the cartridge you have chosen to troubleshoot.

* Page yield based on 5% page coverage prints.

CLOVER’S NAME THE CHATBOT CONTEST
Close

Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.

Recycled Content Certified
Close
Recycled Content Certified

GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.

Low-Emissions Toner
Close
Low-Emissions Toner

Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.

Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Close
Information
Close
Payment Information

To use the Clover Recycling Center, you must provide a credit card which may be charged on a monthly basis to offset program costs. Charges will vary depending on the contents of your return shipments.

View program terms and conditions

* Required Field
Notification
 
Close

 
Close

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Terms and Conditions
Close
Clover Video
Close
Warning
Close
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy
PROMOTION DETAILS
Close