Clover Imaging Remanufactured High Yield Magenta Ink Cartridge for Brother LC103XL

  • Brother - LC103XL, LC103M
  • Brother - LC103XL, LC103M
  • Brother - LC103XL, LC103M
  • Additional image
  • Additional image
  • Additional image

Clover Imaging Remanufactured High Yield Magenta Ink Cartridge for Brother LC103XL

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be contacted about purchasing Clover products.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information

Technical Specifications

Compatible with following printers:

Brother
  • DCP-J152W
  • MFC-J245
  • MFC-J285DW
  • MFC-J4310DW
  • MFC-J4410DW
  • MFC-J450DW
  • MFC-J4510DW
  • MFC-J4610DW
  • MFC-J470DW
  • MFC-J4710DW
  • MFC-J475DW
  • MFC-J650DW
  • MFC-J6520DW
  • MFC-J6720DW
  • MFC-J6920DW
  • MFC-J870DW
  • MFC-J875DW

Cross Compatible OEM numbers:

  • Brother LC1032PKS
  • Brother LC1033PKS

Product Box Dimensions:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.35 lbs

Videos and Downloads

Product Related Videos:

  • High Quality - Environmentally Friendly Inkjet Printer Cartridges

Product Related Downloads:

Product Troubleshooting

Possible Troubleshooting

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer, and locate the chip on the top of the cartridge. Ensure that the chip is intact; and if so, you will want to clean the chip from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Slowly reinstall the cartridge and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have just installed a remanufactured cartridge and the ink levels display as low or empty, there may be a solution for this problem.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the top of the cartridge.

You may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle and follow any on-screen prompts.

If a low or empty ink level still shows, remove the cartridge from your printer and close the cover, turn the machine off and disconnect the power supply for 2 minutes.

When 2 minutes have passed, turn your printer back on and reinstall the cartridge when prompted.

If the error persists, you should return your cartridge to the place of purchase.
In the event your cartridge does not appear to fit into the machine, please look at the print port on the cartridge. Some inkjets may have a protective covering that will need to be punctured upon insertion into your printer, as indicated in the image below.



The puncturing of this material will allow for the cartridge to be seated into the space properly. If your cartridge does not contain this material, please just ensure you are inserting the cartridge into the correct slot and hear it click into place.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, please ensure that there are no low or empty ink warnings on your printer or computer screen.

If a warning is present, you will need to replace your inkjet cartridge.

If no warning is displayed, you may need to run a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle using your printer's touch screen, please do the following:

(If your printer does not have a touch screen, please consult your printer's user manual for instructions on how to perform a cleaning cycle.)
  • On the printer’s touch screen, press the “ink”icon. 
  • Scroll down and select the "Cleaning" icon. 
  • Scroll down and select “all”. You may also choose black or color depending on which cartridge is not printing well. 
  • You will observe your printer performing a cleaning cycle. Please note that the cycle may take several minutes to complete. 

Once the cleaning cycle is finished, your printer will display "completed".

Next run a print quality check to see if the print quality has improved.
  • To do so, press the "ink" icon 
  • Next press "Test Print", and then press "Print Quality" 
  • Select "Start" 

You will observe your printer printing a test page.

If the print on your test page is satisfactory, select "Yes". You may return to the document you wish to print and resume printing.

If the print on your test page is unsatisfactory, you may select "No" to run another cleaning cycle.
  • Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary. 

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer, and locate the chip on the top of the cartridge. Ensure that the chip is intact; and if so, you will want to clean the chip from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Slowly reinstall the cartridge and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have just installed a remanufactured cartridge and the ink levels display as low or empty, there may be a solution for this problem.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the top of the cartridge.

You may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle and follow any on-screen prompts.

If a low or empty ink level still shows, remove the cartridge from your printer and close the cover, turn the machine off and disconnect the power supply for 2 minutes.

When 2 minutes have passed, turn your printer back on and reinstall the cartridge when prompted.

If the error persists, you should return your cartridge to the place of purchase.
In the event your cartridge does not appear to fit into the machine, please look at the print port on the cartridge. Some inkjets may have a protective covering that will need to be punctured upon insertion into your printer, as indicated in the image below.



The puncturing of this material will allow for the cartridge to be seated into the space properly. If your cartridge does not contain this material, please just ensure you are inserting the cartridge into the correct slot and hear it click into place.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, please ensure that there are no low or empty ink warnings on your printer or computer screen.

If a warning is present, you will need to replace your inkjet cartridge.

If no warning is displayed, you may need to run a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle using your printer's touch screen, please do the following:

(If your printer does not have a touch screen, please consult your printer's user manual for instructions on how to perform a cleaning cycle.)
  • On the printer’s touch screen, press the “ink”icon. 
  • Scroll down and select the "Cleaning" icon. 
  • Scroll down and select “all”. You may also choose black or color depending on which cartridge is not printing well. 
  • You will observe your printer performing a cleaning cycle. Please note that the cycle may take several minutes to complete. 

Once the cleaning cycle is finished, your printer will display "completed".

Next run a print quality check to see if the print quality has improved.
  • To do so, press the "ink" icon 
  • Next press "Test Print", and then press "Print Quality" 
  • Select "Start" 

You will observe your printer printing a test page.

If the print on your test page is satisfactory, select "Yes". You may return to the document you wish to print and resume printing.

If the print on your test page is unsatisfactory, you may select "No" to run another cleaning cycle.
  • Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary. 

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.

* Page yield based on 5% page coverage prints.

Yield increase
Close
Yield increase

Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.

Recycled Content Certified
Close
Recycled Content Certified

GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.

Low-Emissions Toner
Close
Low-Emissions Toner

Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.

Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Close
Information
Close
Payment Information

To use the Clover Recycling Center, you must provide a credit card which may be charged on a monthly basis to offset program costs. Charges will vary depending on the contents of your return shipments.

View program terms and conditions

* Required Field
Notification
 
Close

 
Close

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Terms and Conditions
Close
Clover Video
Close
Warning
Close
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy
PROMOTION DETAILS
Close