Clover Imaging Remanufactured Color Ink Cartridge for Canon CL-246 (8281B001)

  • Canon - 8281B001
  • Canon - 8281B001
  • Canon - 8281B001
  • Additional image
  • Additional image
  • Additional image

Clover Imaging Remanufactured Color Ink Cartridge for Canon CL-246 (8281B001)

  • 118077
  • Inkjet
  • Canon - 8281B001
  • CL-246
  • Tri-Color
  • 180 Pages *

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be contacted about purchasing Clover products.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information

Technical Specifications

Compatible with following printers:

Canon
  • PIXMA iP2820
  • PIXMA MG2420
  • PIXMA MG2520
  • PIXMA MG2522
  • PIXMA MG2525
  • PIXMA MG2920
  • PIXMA MG2922
  • PIXMA MG2924
  • PIXMA MG3020
  • PIXMA MX492
  • PIXMA TR4520
  • PIXMA TS202
  • PIXMA TS302
  • PIXMA TS3120
  • PIXMA TS3320

Product Box Dimensions:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.266666 lbs

Videos and Downloads

Product Related Videos:

  • High Quality - Environmentally Friendly Inkjet Printer Cartridges

Product Related Downloads:

Product Troubleshooting

Possible Troubleshooting

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.
  • Remove the cartridge from your printer and locate the copper contacts. Ensure that the copper strip is intact; and if so, you will want to clean the contacts from any obstruction or debris as this may be preventing the alignment from completing. 
  • Using a lint free cloth (such as a coffee filter), gently wipe the copper contacts to remove any obstruction or debris. 
  • It may also be helpful to clean the nozzle plate to ensure a proper ink flow. Dampen a lint-free cloth with bottled water and gently wipe the nozzle plate 2-3 times until you see ink appearing on the cloth. Please note that the ink will stain any underlying surfaces so please use caution and discard the cloth as soon as the nozzle plate has been cleaned. 
  • Reinstall your cartridge into the printer and attempt the alignment process again. 

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your specific printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that the cartridge cannot be recognized, is an incompatible cartridge, the wrong cartridge is installed or if your printer has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, open the cover on the printer and remove the cartridge.

Upon removing the cartridge, you will need to locate the copper contacts . If the copper strip is missing, the cartridge will not function and will need to be replaced.

Make sure not to touch or remove the copper strip. These contacts communicate with the printer to print your documents.

If the copper strip is intact, you may need to clean the contacts from any type of obstruction or debris as this may be the cause of the error.
  • You may use a pencil eraser to clean the contacts. 
  • Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris. 
  • You may also use any type of lint free cloth or a coffee filter. 
  • Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to make sure you have properly removed the clip from the cartridge.

This clip protects the electrical circuitry on the cartridge and also keeps the cartridge from leaking.

Once the clip has been removed, you should see a copper strip and this is the cartridge’s contacts. These contacts communicate with the printer to print your documents. Please keep in mind that there are various styles of clips and that the clip we are removing in the video may not be identical to the one on your cartridge. Clips will vary in color, size and shape depending on the cartridge model and supplier of your remanufactured inkjet.

After you remove the clip, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.

If you are trying to install the cartridge in the correct location, the cartridge may have been mislabeled and should be returned to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Some remanufactured cartridges come with a clip that protects the printhead and helps to preserve and maintain the quality of the cartridge.

To remove this clip, place the cartridge on a solid surface. Holding the clip with one hand, press down on the cartridge with the other hand and pull back on the clip.

You may also find it helpful to think of the clip as the tab on a soda can. Place the cartridge on a solid surface with the clip at the top. Hold the cartridge in one hand and "peel" the clip back with the other.

Some resistance is normal so don't be alarmed.

You may notice some residual ink on the pad or some ink on the printhead of the cartridge. This is also normal as some clips serve to prime the cartridge in order to allow it to function properly.

Once the clip has been removed, you may install the cartridge into your printer as normal.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you notice that the ink gauge displays low or no ink level, DO NOT be alarmed. This is very common because you are using a remanufactured inkjet. The ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge, but this message can be bypassed easily when necessary and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an ESTIMATE of how much ink may be remaining in the cartridge.

To continue printing, press and hold the stop/reset button or the resume button for 10 seconds.

You may click here to see if your printer model is listed and follow the instructions specific to your printer. Otherwise, please consult your printer’s user manual if you are not sure which button to press.
If your printer displays a low or empty ink level, you may be able to resolve this by cleaning the cartridge contacts.

Open the cover on the printer and remove the cartridge. Upon removing the cartridge, you will need to locate the copper contacts . If the copper strip is missing, the cartridge will not function and will need to be replaced.

Make sure not to touch or remove the copper strip. These contacts communicate with the printer to print your documents.

If the copper strip is intact, you may need to clean the contacts from any type of obstruction or debris as this may be the cause of the error.

•You may use a pencil eraser to clean the contacts.
•Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris.
•You may also use any type of lint free cloth or a coffee filter.
•Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If that does not clear the error, your cartridge may not contain the technology that will read a correct ink level.  If this is the case, this message can be bypassed easily and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an ESTIMATE of how much ink may be remaining in the cartridge.

To continue printing, press and hold the stop/reset button or the resume button for 10 seconds.

Please consult your printer’s user manual if you are not sure which button to press.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If your cartridge has stopped printing and you have just recently installed it into your machine, please follow the steps below to resolve the issue.

If you notice that the ink gauge displays low or no ink level, DO NOT be alarmed. This is very common because you are using a remanufactured inkjet. The ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge, but this message can be bypassed easily when necessary and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an ESTIMATE of how much ink may be remaining in the cartridge.

To continue printing, press and hold the stop/reset button or the resume button for 10 seconds.

You may click here to see if your printer model is listed and follow the instructions specific to your printer. Otherwise, please consult your printer’s user manual if you are not sure which button to press.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you are not able to receive faxes automatically due to a low ink message, you can deactivate the ink level detection and manually retrieve any stored faxes. This is usually accomplished through pressing a series of buttons, and your printer manual will provide instructions for your specific printer model. Click here to be directed to the OEM website where you can download your printer's user manual.

Please note that if you deactivate the ink level detection feature, the cartridge will need to be changed immediately when the ink begins to show signs of running out (poor print quality, streaks or lines in the print, etc). If the cartridge runs out of ink and a fax is printed inadequately, you will not be able to reprint the page. Once a page of the fax prints, the fax is deleted from memory and cannot be retrieved.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that the cartridge cannot be recognized, is an incompatible cartridge, the wrong cartridge is installed or if your printer has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, open the cover on the printer and remove the cartridge.

Upon removing the cartridge, you will need to locate the copper contacts . If the copper strip is missing, the cartridge will not function and will need to be replaced.

Make sure not to touch or remove the copper strip. These contacts communicate with the printer to print your documents.

If the copper strip is intact, you may need to clean the contacts from any type of obstruction or debris as this may be the cause of the error.
  • You may use a pencil eraser to clean the contacts. 
  • Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris. 
  • You may also use any type of lint free cloth or a coffee filter. 
  • Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you may need to perform a cleaning cycle in order to improve the quality of your print. 

This video will show you an example of how to perform a cleaning cycle through your printer's control panel.

If your printer does not have a control panel, please consult your printer's user manual for instructions on how to perform a cleaning cycle. (Or you may go to the manufacturer's website to view your printer's user manual online.)

  • Press the Menu button on your printer until you see Maintenance 
  • Using the arrow keys, scroll to Cleaning and press OK 
  • Your printer will perform a cleaning cycle. 
  • Once the cycle is complete, you will want to print a test page to see if the print quality has improved. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

You may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary 

If you are still not satisfied with the print after you perform the cleaning cycles, the next step is to try blotting the cartridge in order to make sure that the printhead nozzles are not clogged with dry ink. 

  • You will want to use a lint free towel such as a coffee filter. Fold the filter in half. 
  • We also suggest using a paper towel or other absorbent material to place under the lint free cloth to protect your surface from the ink as it may stain your underlying surface. 
  • Remove your cartridge from the printer. 
  • Locate the printhead. This is on the bottom of the cartridge. Do not touch the printhead or bottom of your cartridge as this can damage the cartridge. 
  • Hold the cartridge with the printhead facing downward. 
  • Simply press the printhead of the cartridge onto the coffee filter and hold for three (3) seconds. 
  • Upon lifting the cartridge back up, three (3) colors should appear on the lint free cloth. 

If a good blot does appear on the cloth, reinstall your cartridge and attempt your print again. 

If your cartridge does not provide a good blot, it is possible that the ink has all been consumed; and you should replace your cartridge. 

However, if you are just installing the cartridge for the first time and/or have recently installed the cartridge and are experiencing this problem, you should return your cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you may need to perform a cleaning cycle in order to improve the quality of your print. 

This video will show you an example of how to perform a cleaning cycle through your printer's control panel.

If your printer does not have a control panel, please consult your printer's user manual for instructions on how to perform a cleaning cycle. (Or you may go to the manufacturer's website to view your printer's user manual online.)

  • Press the Menu button on your printer until you see Maintenance 
  • Using the arrow keys, scroll to Cleaning and press OK 
  • Your printer will perform a cleaning cycle. 
  • Once the cycle is complete, you will want to print a test page to see if the print quality has improved. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

You may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary 

If you are still not satisfied with the print after you perform the cleaning cycles, the next step is to try blotting the cartridge in order to make sure that the printhead nozzles are not clogged with dry ink. 

  • You will want to use a lint free towel such as a coffee filter. Fold the filter in half. 
  • We also suggest using a paper towel or other absorbent material to place under the lint free cloth to protect your surface from the ink as it may stain your underlying surface. 
  • Remove your cartridge from the printer. 
  • Locate the printhead. This is on the bottom of the cartridge. Do not touch the printhead or bottom of your cartridge as this can damage the cartridge. 
  • Hold the cartridge with the printhead facing downward. 
  • Simply press the printhead of the cartridge onto the coffee filter and hold for three (3) seconds. 
  • Upon lifting the cartridge back up, three (3) colors should appear on the lint free cloth. 

If a good blot does appear on the cloth, reinstall your cartridge and attempt your print again. 

If your cartridge does not provide a good blot, it is possible that the ink has all been consumed; and you should replace your cartridge. 

However, if you are just installing the cartridge for the first time and/or have recently installed the cartridge and are experiencing this problem, you should return your cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.
  • Remove the cartridge from your printer and locate the copper contacts. Ensure that the copper strip is intact; and if so, you will want to clean the contacts from any obstruction or debris as this may be preventing the alignment from completing. 
  • Using a lint free cloth (such as a coffee filter), gently wipe the copper contacts to remove any obstruction or debris. 
  • It may also be helpful to clean the nozzle plate to ensure a proper ink flow. Dampen a lint-free cloth with bottled water and gently wipe the nozzle plate 2-3 times until you see ink appearing on the cloth. Please note that the ink will stain any underlying surfaces so please use caution and discard the cloth as soon as the nozzle plate has been cleaned. 
  • Reinstall your cartridge into the printer and attempt the alignment process again. 

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your specific printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that the cartridge cannot be recognized, is an incompatible cartridge, the wrong cartridge is installed or if your printer has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, open the cover on the printer and remove the cartridge.

Upon removing the cartridge, you will need to locate the copper contacts . If the copper strip is missing, the cartridge will not function and will need to be replaced.

Make sure not to touch or remove the copper strip. These contacts communicate with the printer to print your documents.

If the copper strip is intact, you may need to clean the contacts from any type of obstruction or debris as this may be the cause of the error.
  • You may use a pencil eraser to clean the contacts. 
  • Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris. 
  • You may also use any type of lint free cloth or a coffee filter. 
  • Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to make sure you have properly removed the clip from the cartridge.

This clip protects the electrical circuitry on the cartridge and also keeps the cartridge from leaking.

Once the clip has been removed, you should see a copper strip and this is the cartridge’s contacts. These contacts communicate with the printer to print your documents. Please keep in mind that there are various styles of clips and that the clip we are removing in the video may not be identical to the one on your cartridge. Clips will vary in color, size and shape depending on the cartridge model and supplier of your remanufactured inkjet.

After you remove the clip, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.

If you are trying to install the cartridge in the correct location, the cartridge may have been mislabeled and should be returned to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Some remanufactured cartridges come with a clip that protects the printhead and helps to preserve and maintain the quality of the cartridge.

To remove this clip, place the cartridge on a solid surface. Holding the clip with one hand, press down on the cartridge with the other hand and pull back on the clip.

You may also find it helpful to think of the clip as the tab on a soda can. Place the cartridge on a solid surface with the clip at the top. Hold the cartridge in one hand and "peel" the clip back with the other.

Some resistance is normal so don't be alarmed.

You may notice some residual ink on the pad or some ink on the printhead of the cartridge. This is also normal as some clips serve to prime the cartridge in order to allow it to function properly.

Once the clip has been removed, you may install the cartridge into your printer as normal.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you notice that the ink gauge displays low or no ink level, DO NOT be alarmed. This is very common because you are using a remanufactured inkjet. The ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge, but this message can be bypassed easily when necessary and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an ESTIMATE of how much ink may be remaining in the cartridge.

To continue printing, press and hold the stop/reset button or the resume button for 10 seconds.

You may click here to see if your printer model is listed and follow the instructions specific to your printer. Otherwise, please consult your printer’s user manual if you are not sure which button to press.
If your printer displays a low or empty ink level, you may be able to resolve this by cleaning the cartridge contacts.

Open the cover on the printer and remove the cartridge. Upon removing the cartridge, you will need to locate the copper contacts . If the copper strip is missing, the cartridge will not function and will need to be replaced.

Make sure not to touch or remove the copper strip. These contacts communicate with the printer to print your documents.

If the copper strip is intact, you may need to clean the contacts from any type of obstruction or debris as this may be the cause of the error.

•You may use a pencil eraser to clean the contacts.
•Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris.
•You may also use any type of lint free cloth or a coffee filter.
•Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If that does not clear the error, your cartridge may not contain the technology that will read a correct ink level.  If this is the case, this message can be bypassed easily and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an ESTIMATE of how much ink may be remaining in the cartridge.

To continue printing, press and hold the stop/reset button or the resume button for 10 seconds.

Please consult your printer’s user manual if you are not sure which button to press.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If your cartridge has stopped printing and you have just recently installed it into your machine, please follow the steps below to resolve the issue.

If you notice that the ink gauge displays low or no ink level, DO NOT be alarmed. This is very common because you are using a remanufactured inkjet. The ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge, but this message can be bypassed easily when necessary and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an ESTIMATE of how much ink may be remaining in the cartridge.

To continue printing, press and hold the stop/reset button or the resume button for 10 seconds.

You may click here to see if your printer model is listed and follow the instructions specific to your printer. Otherwise, please consult your printer’s user manual if you are not sure which button to press.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you are not able to receive faxes automatically due to a low ink message, you can deactivate the ink level detection and manually retrieve any stored faxes. This is usually accomplished through pressing a series of buttons, and your printer manual will provide instructions for your specific printer model. Click here to be directed to the OEM website where you can download your printer's user manual.

Please note that if you deactivate the ink level detection feature, the cartridge will need to be changed immediately when the ink begins to show signs of running out (poor print quality, streaks or lines in the print, etc). If the cartridge runs out of ink and a fax is printed inadequately, you will not be able to reprint the page. Once a page of the fax prints, the fax is deleted from memory and cannot be retrieved.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that the cartridge cannot be recognized, is an incompatible cartridge, the wrong cartridge is installed or if your printer has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, open the cover on the printer and remove the cartridge.

Upon removing the cartridge, you will need to locate the copper contacts . If the copper strip is missing, the cartridge will not function and will need to be replaced.

Make sure not to touch or remove the copper strip. These contacts communicate with the printer to print your documents.

If the copper strip is intact, you may need to clean the contacts from any type of obstruction or debris as this may be the cause of the error.
  • You may use a pencil eraser to clean the contacts. 
  • Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris. 
  • You may also use any type of lint free cloth or a coffee filter. 
  • Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you may need to perform a cleaning cycle in order to improve the quality of your print. 

This video will show you an example of how to perform a cleaning cycle through your printer's control panel.

If your printer does not have a control panel, please consult your printer's user manual for instructions on how to perform a cleaning cycle. (Or you may go to the manufacturer's website to view your printer's user manual online.)

  • Press the Menu button on your printer until you see Maintenance 
  • Using the arrow keys, scroll to Cleaning and press OK 
  • Your printer will perform a cleaning cycle. 
  • Once the cycle is complete, you will want to print a test page to see if the print quality has improved. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

You may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary 

If you are still not satisfied with the print after you perform the cleaning cycles, the next step is to try blotting the cartridge in order to make sure that the printhead nozzles are not clogged with dry ink. 

  • You will want to use a lint free towel such as a coffee filter. Fold the filter in half. 
  • We also suggest using a paper towel or other absorbent material to place under the lint free cloth to protect your surface from the ink as it may stain your underlying surface. 
  • Remove your cartridge from the printer. 
  • Locate the printhead. This is on the bottom of the cartridge. Do not touch the printhead or bottom of your cartridge as this can damage the cartridge. 
  • Hold the cartridge with the printhead facing downward. 
  • Simply press the printhead of the cartridge onto the coffee filter and hold for three (3) seconds. 
  • Upon lifting the cartridge back up, three (3) colors should appear on the lint free cloth. 

If a good blot does appear on the cloth, reinstall your cartridge and attempt your print again. 

If your cartridge does not provide a good blot, it is possible that the ink has all been consumed; and you should replace your cartridge. 

However, if you are just installing the cartridge for the first time and/or have recently installed the cartridge and are experiencing this problem, you should return your cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you may need to perform a cleaning cycle in order to improve the quality of your print. 

This video will show you an example of how to perform a cleaning cycle through your printer's control panel.

If your printer does not have a control panel, please consult your printer's user manual for instructions on how to perform a cleaning cycle. (Or you may go to the manufacturer's website to view your printer's user manual online.)

  • Press the Menu button on your printer until you see Maintenance 
  • Using the arrow keys, scroll to Cleaning and press OK 
  • Your printer will perform a cleaning cycle. 
  • Once the cycle is complete, you will want to print a test page to see if the print quality has improved. 

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

You may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary 

If you are still not satisfied with the print after you perform the cleaning cycles, the next step is to try blotting the cartridge in order to make sure that the printhead nozzles are not clogged with dry ink. 

  • You will want to use a lint free towel such as a coffee filter. Fold the filter in half. 
  • We also suggest using a paper towel or other absorbent material to place under the lint free cloth to protect your surface from the ink as it may stain your underlying surface. 
  • Remove your cartridge from the printer. 
  • Locate the printhead. This is on the bottom of the cartridge. Do not touch the printhead or bottom of your cartridge as this can damage the cartridge. 
  • Hold the cartridge with the printhead facing downward. 
  • Simply press the printhead of the cartridge onto the coffee filter and hold for three (3) seconds. 
  • Upon lifting the cartridge back up, three (3) colors should appear on the lint free cloth. 

If a good blot does appear on the cloth, reinstall your cartridge and attempt your print again. 

If your cartridge does not provide a good blot, it is possible that the ink has all been consumed; and you should replace your cartridge. 

However, if you are just installing the cartridge for the first time and/or have recently installed the cartridge and are experiencing this problem, you should return your cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing"

* Page yield based on 5% page coverage prints.

Yield increase
Close
Yield increase

Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.

Recycled Content Certified
Close
Recycled Content Certified

GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.

Low-Emissions Toner
Close
Low-Emissions Toner

Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.

Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Close
Information
Close
Payment Information

To use the Clover Recycling Center, you must provide a credit card which may be charged on a monthly basis to offset program costs. Charges will vary depending on the contents of your return shipments.

View program terms and conditions

* Required Field
Notification
 
Close

 
Close

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Terms and Conditions
Close
Clover Video
Close
Warning
Close
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy
PROMOTION DETAILS
Close