Clover Imaging Remanufactured Extra High Capacity Magenta Ink Cartridge for Dell Series 33XL

Clover Imaging Remanufactured Extra High Capacity Magenta Ink Cartridge for Dell Series 33XL

  • 118046
  • Inkjet
  • Dell - Series33XL
    Dell - 331-7379
    Dell - 6M6FG
  • Magenta
  • 700 Pages (@ 5% coverage)
  • Extra High Capacity

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be connected to a reseller.

BUSINESS OR CONSUMER

You Name is required field.
Zip Code is required field.

Receive marketing information from Clover and its affiliates.
See our Privacy Policy for more details.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information
Technical Specifications

Compatible with following printers:

Dell
  • All-In-One V525w
  • All-In-One V725w

Product Box Dimensions:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.25 lbs
Videos and Downloads

Product Related Videos:

Downloads:

Product Troubleshooting

Possible Troubleshooting

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have attempted to print an alignment page and notice that some of the blocks are shifted out of horizontal alignment, you will need to replace your printhead.

Please note that this issue is caused by the printhead and not the cartridges themselves.

In order to replace your printhead, please contact either the seller of your remanufactured cartridge or Dell.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that the cartridge cannot be recognized, please remove the cartridge from your printer and locate the chip on the front of the cartridge.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the error persists after cleaning the chip, turn your printer off and disconnect the power supply.

Leave unplugged for 2 minutes.

After 2 minutes, plug your printer back in and restart.

If your printer is still not recognizing your cartridge, there may be a problem with the chip.

If you have a second cartridge that has not previously been used, install that into the printer.

If you do not have a second cartridge, you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to remove the tape that covers the ink port on the cartridge.

Now your cartridge is ready to be installed into your printer.

If the cartridge is still not fitting into the machine after you have removed the tape, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have just installed a cartridge and notice that the ink gauge displays low or no ink level, remove the cartridge from the printer and slowly reinstall.

If you are still experiencing a low ink message, turn your printer off and disconnect the power supply for 2 minutes. After 2 minutes, plug the printer back in and power it back on.

If the ink level still does not show full at this point, there is a problem with the cartridge and it should be returned to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating "Interference with Cartridge Communication", please remove the cartridge showing the error from your printer.

Reinstall the cartridge paying careful attention to the installation instructions that are either on your printer or in your printer's user manual.

If you still receive an error after you have properly reinstalled the cartridge, please turn off your printer and disconnect the power source. Leave your printer unplugged for at least 2 minutes.

After 2 minutes, plug your printer back in and restart. If your printer is still not recognizing your cartridge, there may be a problem with the chip.

If you have a second cartridge that has not previously been used, install that into the printer. If you do not have a second cartridge, you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have just installed a cartridge and notice that the ink gauge displays low or no ink level, remove the cartridge from the printer and slowly reinstall.

If you are still experiencing a low ink message, turn your printer off and disconnect the power supply for 2 minutes. After 2 minutes, plug the printer back in and power it back on.

If the ink level still does not show full at this point, there is a problem with the cartridge and it should be returned to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that the cartridge cannot be recognized, please remove the cartridge from your printer and locate the chip on the front of the cartridge.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the error persists after cleaning the chip, turn your printer off and disconnect the power supply.

Leave unplugged for 2 minutes.

After 2 minutes, plug your printer back in and restart.

If your printer is still not recognizing your cartridge, there may be a problem with the chip.

If you have a second cartridge that has not previously been used, install that into the printer.

If you do not have a second cartridge, you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have attempted to print a document and get an error stating there is a printhead error or that your printhead is not recognized or missing, there may be a simple solution to fix this.

Please note that this issue is caused by the printhead and not the cartridges themselves.

  • On your printer, press the Setup button. 
  • Scroll to Maintenance and press “ok” 
  • Scroll to Replace Printhead and press “ok” 
  • Open the printer lid and remove the cartridges from the printer. Lay them on their sides on a paper towel. 
  • Remove the printhead from your printer. 
  • You will need to locate the copper contacts on the back of the printhead and in your printer. 
  • These contacts will need to be cleaned from any type of obstruction or debris as that may be the cause of the error. You may use a pencil eraser to clean the contacts. Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris. You may also use any type of lint free cloth such as a coffee filter. Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris. 
  • Next, carefully clean the contacts inside of the printer. 
  • Once this is complete, replace the printhead in the cradle. 
  • Next replace the cartridges in the printer, close the lid and follow any on screen prompts that may appear. Press “ok” to align the printhead. 

If the problem persists after returning the printhead to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the printhead and cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the printhead, and you should contact Dell directly.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the tape that covers the ink port.

If the tape has been removed and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle, please do the following. Please keep in mind that this process may vary by Printer and that you may also consult your printer’s user manual for instructions on performing a cleaning cycle.
  1. Scroll to Setup and press OK. 
  2. Scroll to Maintenance and press OK. 
  3. Scroll to Clean Printhead and press OK. 
  4. You will now observe your printer performing a cleaning cycle. Please note that the cleaning cycle may take several minutes to complete. 
  5. When the cycle is finished, your printer will print a test page. 
If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If the print is still unsatisfactory, you may perform another cleaning cycle. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the tape that covers the ink port.

If the tape has been removed and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle, please do the following. Please keep in mind that this process may vary by Printer and that you may also consult your printer’s user manual for instructions on performing a cleaning cycle.
  1. Scroll to Setup and press OK. 
  2. Scroll to Maintenance and press OK. 
  3. Scroll to Clean Printhead and press OK. 
  4. You will now observe your printer performing a cleaning cycle. Please note that the cleaning cycle may take several minutes to complete. 
  5. When the cycle is finished, your printer will print a test page. 
If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If the print is still unsatisfactory, you may perform another cleaning cycle. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have attempted to print an alignment page and notice that some of the blocks are shifted out of horizontal alignment, you will need to replace your printhead.

Please note that this issue is caused by the printhead and not the cartridges themselves.

In order to replace your printhead, please contact either the seller of your remanufactured cartridge or Dell.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that the cartridge cannot be recognized, please remove the cartridge from your printer and locate the chip on the front of the cartridge.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the error persists after cleaning the chip, turn your printer off and disconnect the power supply.

Leave unplugged for 2 minutes.

After 2 minutes, plug your printer back in and restart.

If your printer is still not recognizing your cartridge, there may be a problem with the chip.

If you have a second cartridge that has not previously been used, install that into the printer.

If you do not have a second cartridge, you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, the first step is to remove the tape that covers the ink port on the cartridge.

Now your cartridge is ready to be installed into your printer.

If the cartridge is still not fitting into the machine after you have removed the tape, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have just installed a cartridge and notice that the ink gauge displays low or no ink level, remove the cartridge from the printer and slowly reinstall.

If you are still experiencing a low ink message, turn your printer off and disconnect the power supply for 2 minutes. After 2 minutes, plug the printer back in and power it back on.

If the ink level still does not show full at this point, there is a problem with the cartridge and it should be returned to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating "Interference with Cartridge Communication", please remove the cartridge showing the error from your printer.

Reinstall the cartridge paying careful attention to the installation instructions that are either on your printer or in your printer's user manual.

If you still receive an error after you have properly reinstalled the cartridge, please turn off your printer and disconnect the power source. Leave your printer unplugged for at least 2 minutes.

After 2 minutes, plug your printer back in and restart. If your printer is still not recognizing your cartridge, there may be a problem with the chip.

If you have a second cartridge that has not previously been used, install that into the printer. If you do not have a second cartridge, you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have just installed a cartridge and notice that the ink gauge displays low or no ink level, remove the cartridge from the printer and slowly reinstall.

If you are still experiencing a low ink message, turn your printer off and disconnect the power supply for 2 minutes. After 2 minutes, plug the printer back in and power it back on.

If the ink level still does not show full at this point, there is a problem with the cartridge and it should be returned to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that the cartridge cannot be recognized, please remove the cartridge from your printer and locate the chip on the front of the cartridge.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, removing any type of obstruction or debris. 

Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the error persists after cleaning the chip, turn your printer off and disconnect the power supply.

Leave unplugged for 2 minutes.

After 2 minutes, plug your printer back in and restart.

If your printer is still not recognizing your cartridge, there may be a problem with the chip.

If you have a second cartridge that has not previously been used, install that into the printer.

If you do not have a second cartridge, you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have attempted to print a document and get an error stating there is a printhead error or that your printhead is not recognized or missing, there may be a simple solution to fix this.

Please note that this issue is caused by the printhead and not the cartridges themselves.

  • On your printer, press the Setup button. 
  • Scroll to Maintenance and press “ok” 
  • Scroll to Replace Printhead and press “ok” 
  • Open the printer lid and remove the cartridges from the printer. Lay them on their sides on a paper towel. 
  • Remove the printhead from your printer. 
  • You will need to locate the copper contacts on the back of the printhead and in your printer. 
  • These contacts will need to be cleaned from any type of obstruction or debris as that may be the cause of the error. You may use a pencil eraser to clean the contacts. Gently brush the copper strip with the pencil eraser to remove any potential obstruction or debris. You may also use any type of lint free cloth such as a coffee filter. Again, gently wipe the copper strip with the lint free cloth removing any type of obstruction or debris. 
  • Next, carefully clean the contacts inside of the printer. 
  • Once this is complete, replace the printhead in the cradle. 
  • Next replace the cartridges in the printer, close the lid and follow any on screen prompts that may appear. Press “ok” to align the printhead. 

If the problem persists after returning the printhead to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the printhead and cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the printhead, and you should contact Dell directly.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the tape that covers the ink port.

If the tape has been removed and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle, please do the following. Please keep in mind that this process may vary by Printer and that you may also consult your printer’s user manual for instructions on performing a cleaning cycle.
  1. Scroll to Setup and press OK. 
  2. Scroll to Maintenance and press OK. 
  3. Scroll to Clean Printhead and press OK. 
  4. You will now observe your printer performing a cleaning cycle. Please note that the cleaning cycle may take several minutes to complete. 
  5. When the cycle is finished, your printer will print a test page. 
If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If the print is still unsatisfactory, you may perform another cleaning cycle. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, first ensure that you have removed the tape that covers the ink port.

If the tape has been removed and the print quality is still unsatisfactory, you may need to perform a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle, please do the following. Please keep in mind that this process may vary by Printer and that you may also consult your printer’s user manual for instructions on performing a cleaning cycle.
  1. Scroll to Setup and press OK. 
  2. Scroll to Maintenance and press OK. 
  3. Scroll to Clean Printhead and press OK. 
  4. You will now observe your printer performing a cleaning cycle. Please note that the cleaning cycle may take several minutes to complete. 
  5. When the cycle is finished, your printer will print a test page. 
If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If the print is still unsatisfactory, you may perform another cleaning cycle. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
Information
Close
Information
Close
Information
Close
 
Close

 
Close

INFORMATION
Close

Are you sure you want to logout?

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Multiple choices
Close

This item is available for outright sale or exchange purchase.
Please choose below.

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Loader
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Information

Your session will expire in 5 minute(s).


Information

Your session has expired, you are now logged out.


Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Upload logo
Close

Allowed format: .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Shipping Information ()

Close
INFORMATION
Close

Your document is being created. Please wait until the download initiates.


Terms and Conditions
Close
Shipping Address List View all addresses
Close
Click on the address to select it
Add new Ship-To address
Close
* Required Field
How it works?
Close

Click the green button "Create New User"

Fill out the form fields for your new user. Select which permissions your new user should have and assign a username and password. Click Save. You will receive an e-mail confirming the new user has been set up successfully. Follow this procedure to set up each new user.

After you have created a new user, the new user will receive an automated email with their new user name and password. They will be given instructions on how to change their password if they would like to choose their own. However, as an administrator, you will always have access to delete/edit users, view their profile information (including their password) and change their permissions.

If you need to edit a user, there are links beside each user to edit or delete the user’s profile.

If you delete a user, the user will now appear on the Deleted Users Page and you can Re-Activate at any time if you need to do so.

Clover Video
Close
Information
Close

Upload Terms and Conditions
Close

Allowed format: .pdf; Max file size: 5MB.

Upload Customer Logo
Close

Allowed format: .jpg, .jpeg, .png, .bmp; Max file size: 5MB.

Resubmit Historical Usage File
Close

Allowed Formats: .xls, .xlsx; Max file size: 5MB.

Warning 
Close

Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning 
Close

Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning
Close
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy
PROMOTION DETAILS
Close