Clover Imaging Remanufactured High Yield Yellow Ink Cartridge for HP C9393AN (HP 88XL)

Clover Imaging Remanufactured High Yield Yellow Ink Cartridge for HP C9393AN (HP 88XL)

  • 115798
  • Inkjet
  • HP - 88XL
    HP - C9393AN
  • Yellow
  • 1,540 Pages (@ 5% coverage)
  • High Yield

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be connected to a reseller.

BUSINESS OR CONSUMER

You Name is required field.
Zip Code is required field.

Receive marketing information from Clover and its affiliates.
See our Privacy Policy for more details.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information
Technical Specifications

Compatible with following printers:

HP
  • Officejet Pro K5400
  • Officejet Pro K5400dn
  • Officejet Pro K5400dtn
  • Officejet Pro K5400n
  • Officejet Pro K5400tn
  • Officejet Pro K550
  • Officejet Pro K550dtn
  • Officejet Pro K550dtwn
  • Officejet Pro K8600
  • Officejet Pro K8600dn
  • Officejet Pro L7480
  • Officejet Pro L7550
  • Officejet Pro L7555
  • Officejet Pro L7580
  • Officejet Pro L7590
  • Officejet Pro L7650
  • Officejet Pro L7680
  • Officejet Pro L7750
  • Officejet Pro L7780

Product Box Dimensions:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.5 lbs
Videos and Downloads

Product Related Videos:

Downloads:

Product Troubleshooting

Possible Troubleshooting

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, reinstall your cartridge into the printer (making sure it clicks into place) and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

To do so, peel back the product label to reveal the OEM label.

Confirm that the supplier label and the OEM labels match.

If the labels do not match, your cartridge has been packaged incorrectly and will not fit into your printer properly. You will need to return your cartridge to the place of purchase.

If the labels do match, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you notice that the ink gauge displays low or no ink level, do not be alarmed - this is very common for a remanufactured inkjet.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the bottom of the cartridge.

If the chip is gold, it is likely the original chip and will not display a correct ink level.

If the chip is a different color (such as green), the ink level should register correctly; but you may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle. You should now see an ink level.

If the chip is gold (or a different color other than green), the ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge; but this message can be bypassed easily, when necessary, and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an estimate of how much ink may be remaining in the cartridge.

To continue printing, click ok or continue through any printer prompts, if applicable, to allow the printer to finish printing.

Or you may press ok on your printer’s LCD screen, if it has one.

If you do not see an option to bypass the low ink message, please click here for an example of what to look for on your printer.

If you have attempted this troubleshooting and are still not able to print, there may be a problem with the cartridge and you should contact the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
You may encounter an error stating that "HP's ink cartridge and printer warranties do not cover repairs or service due to the use of non-HP cartridges or non-HP ink".

It is important to note that most remanufactured inkjet cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.

In order to continue or begin using your printer, click OK to dismiss the printer prompts that appear on your screen after installing the remanufactured cartridges.

This message may reappear prior to the depletion of your cartridge. Please follow the same procedure to dismiss the message if this does occur.

Your rights as a consumer are protected under the Magnuson-Moss Warranty Federal Trade Commission Improvement Act, Subparagraph C, Section 101.

"The use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer."

Please click here for more information
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that your cartridge is expired, the cartridge will not function and should be replaced.

If you have just installed the cartridge, please contact the seller of your remanufactured inkjet for a replacement.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the quality of print, you may need to perform a cleaning cycle in order to improve the quality of your print.

To clean the printhead:
  • Select the HP Solutions center. This will either be on your desktop or accessible through your computer's Start Menu. 
  • On XP computers you may find it by navigating to Start, All Programs, HP, HP Solution Center
  • Once you have accessed the Solutions Center, select Settings 
  • Select the Printer Tool Box 
  • Select "Clean the print heads" 
  • Select "Clean" 
  • Your printer will now perform a cleaning cycle 

When the cleaning cycle is complete a test page will print.

If you are satisfied with the quality of the print you may select "Done".

If the print quality is still unsatisfactory, perform another cleaning cycle.
  • Please be aware that cleaning cycles consume a fair amount of ink and should only be performed when necessary. 

If you are not satisfied with the print quality after two or three consecutive cleaning cycles, the cartridge may be defective and need to be returned to the place of purchase.
If you encounter an error message stating "User Intervention Required", there may be a simple solution to fix this.

  • Restart both your printer and computer and attempt your print again

If that does not resolve the error, please try to clear the Print Spooler:

  • Search Windows for Services, and then click Services in the list of results. (The Search Bar can be found by clicking the Windows button in the lower left corner of the screen.)
  • Select Print Spooler from the alphabetical list.
  • Right-click Print Spooler and choose "Stop".
Next close the Services window and use Windows Explorer to go to C:\Windows\System32\Spool\PRINTERS.

  • Open Windows Explorer (the icon that looks like a file folder).
  • Select the (C:) drive in the left pane under "Computer".
  • Double-click the Windows folder.
  • Scroll down and open the "System32" folder.
  • Open the "spool" folder and delete all files inside the PRINTERS folder.
  • Restart your computer and attempt your print again 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing".
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, reinstall your cartridge into the printer (making sure it clicks into place) and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

To do so, peel back the product label to reveal the OEM label.

Confirm that the supplier label and the OEM labels match.

If the labels do not match, your cartridge has been packaged incorrectly and will not fit into your printer properly. You will need to return your cartridge to the place of purchase.

If the labels do match, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you notice that the ink gauge displays low or no ink level, do not be alarmed - this is very common for a remanufactured inkjet.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the bottom of the cartridge.

If the chip is gold, it is likely the original chip and will not display a correct ink level.

If the chip is a different color (such as green), the ink level should register correctly; but you may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle. You should now see an ink level.

If the chip is gold (or a different color other than green), the ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”. There is no way to reset this gauge; but this message can be bypassed easily, when necessary, and will not affect your printing performance.

Keep in mind that the ink gauges on printers only serve as an estimate of how much ink may be remaining in the cartridge.

To continue printing, click ok or continue through any printer prompts, if applicable, to allow the printer to finish printing.

Or you may press ok on your printer’s LCD screen, if it has one.

If you do not see an option to bypass the low ink message, please click here for an example of what to look for on your printer.

If you have attempted this troubleshooting and are still not able to print, there may be a problem with the cartridge and you should contact the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
You may encounter an error stating that "HP's ink cartridge and printer warranties do not cover repairs or service due to the use of non-HP cartridges or non-HP ink".

It is important to note that most remanufactured inkjet cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.

In order to continue or begin using your printer, click OK to dismiss the printer prompts that appear on your screen after installing the remanufactured cartridges.

This message may reappear prior to the depletion of your cartridge. Please follow the same procedure to dismiss the message if this does occur.

Your rights as a consumer are protected under the Magnuson-Moss Warranty Federal Trade Commission Improvement Act, Subparagraph C, Section 101.

"The use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer."

Please click here for more information
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that your cartridge is expired, the cartridge will not function and should be replaced.

If you have just installed the cartridge, please contact the seller of your remanufactured inkjet for a replacement.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the quality of print, you may need to perform a cleaning cycle in order to improve the quality of your print.

To clean the printhead:
  • Select the HP Solutions center. This will either be on your desktop or accessible through your computer's Start Menu. 
  • On XP computers you may find it by navigating to Start, All Programs, HP, HP Solution Center
  • Once you have accessed the Solutions Center, select Settings 
  • Select the Printer Tool Box 
  • Select "Clean the print heads" 
  • Select "Clean" 
  • Your printer will now perform a cleaning cycle 

When the cleaning cycle is complete a test page will print.

If you are satisfied with the quality of the print you may select "Done".

If the print quality is still unsatisfactory, perform another cleaning cycle.
  • Please be aware that cleaning cycles consume a fair amount of ink and should only be performed when necessary. 

If you are not satisfied with the print quality after two or three consecutive cleaning cycles, the cartridge may be defective and need to be returned to the place of purchase.
If you encounter an error message stating "User Intervention Required", there may be a simple solution to fix this.

  • Restart both your printer and computer and attempt your print again

If that does not resolve the error, please try to clear the Print Spooler:

  • Search Windows for Services, and then click Services in the list of results. (The Search Bar can be found by clicking the Windows button in the lower left corner of the screen.)
  • Select Print Spooler from the alphabetical list.
  • Right-click Print Spooler and choose "Stop".
Next close the Services window and use Windows Explorer to go to C:\Windows\System32\Spool\PRINTERS.

  • Open Windows Explorer (the icon that looks like a file folder).
  • Select the (C:) drive in the left pane under "Computer".
  • Double-click the Windows folder.
  • Scroll down and open the "System32" folder.
  • Open the "spool" folder and delete all files inside the PRINTERS folder.
  • Restart your computer and attempt your print again 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing".
Information
Close
Information
Close
Information
Close
 
Close

 
Close

INFORMATION
Close

Are you sure you want to logout?

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Multiple choices
Close

This item is available for outright sale or exchange purchase.
Please choose below.

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Loader
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Information

Your session will expire in 5 minute(s).


Information

Your session has expired. You will now be redirected back to the home page.


Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Upload logo
Close

Allowed format: .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Shipping Information ()

Close
INFORMATION
Close

Your document is being created. Please wait until the download initiates.


Terms and Conditions
Close
Shipping Address List View all addresses
Close
Click on the address to select it
Add new Ship-To address
Close
* Required Field
How it works?
Close

Click the green button "Create New User"

Fill out the form fields for your new user. Select which permissions your new user should have and assign a username and password. Click Save. You will receive an e-mail confirming the new user has been set up successfully. Follow this procedure to set up each new user.

After you have created a new user, the new user will receive an automated email with their new user name and password. They will be given instructions on how to change their password if they would like to choose their own. However, as an administrator, you will always have access to delete/edit users, view their profile information (including their password) and change their permissions.

If you need to edit a user, there are links beside each user to edit or delete the user’s profile.

If you delete a user, the user will now appear on the Deleted Users Page and you can Re-Activate at any time if you need to do so.

Clover Video
Close
Information
Close

Upload Terms and Conditions
Close

Allowed format: .pdf; Max file size: 5MB.

Upload Customer Logo
Close

Allowed format: .jpg, .jpeg, .png, .bmp; Max file size: 5MB.

Resubmit Historical Usage File
Close

Allowed Formats: .xls, .xlsx; Max file size: 5MB.

Warning 
Close

Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning 
Close

Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning
Close
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy
PROMOTION DETAILS
Close