EPC Remanufactured Yellow Ink Cartridge for Epson T126420

EPC Remanufactured Yellow Ink Cartridge for Epson T126420

  • EPC26420
  • Inkjet
  • Epson - T126
    Epson - T126420
  • Yellow
  • 470 Pages (@ 5% coverage)
  • No

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be connected to a reseller.

BUSINESS OR CONSUMER

You Name is required field.
Zip Code is required field.

Receive marketing information from Clover and its affiliates.
See our Privacy Policy for more details.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information
Technical Specifications

Compatible with following printers:

Epson
  • Stylus NX330
  • Stylus NX430
  • Workforce 435
  • Workforce 520
  • Workforce 545
  • Workforce 60
  • Workforce 630
  • Workforce 633
  • Workforce 635
  • Workforce 645
  • Workforce 840
  • Workforce 845
  • Workforce WF-3520
  • Workforce WF-3540
  • Workforce WF-7010
  • Workforce WF-7510

Product Box Dimensions:

  • EA
  • 3.74016 in
  • 0.98425 in
  • 2.95276 in
  • 0.25 lbs
Videos and Downloads

Product Related Videos:

Downloads:

Product Troubleshooting

Possible Troubleshooting

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip you may use a pencil eraser. 
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
  • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

Always be sure to follow the Manufacturer's instructions to gently shake the cartridge in the bag 4-5 times before installing a new cartridge, but never shake a cartridge after it has been installed into the printer.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that "you have not installed genuine Epson ink cartridges", you will need to continue through this error message to allow your printer to print your document.

Simply press the "continue" button. Do not press the "cancel" button.

Click Finish on the next screen.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip you may use a pencil eraser. 
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
  • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

Always be sure to follow the Manufacturer's instructions to gently shake the cartridge in the bag 4-5 times before installing a new cartridge, but never shake a cartridge after it has been installed into the printer.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you will need to ensure that you have removed the pull tab that covers the ink port.

If there are silver seals and no pull tab, please ensure that both seals have been punctured by the printer.

If you have already removed the pull tab or if both seals have been pierced, you may need to perform a cleaning cycle to improve the quality of your print.
  • To perform a cleaning cycle, find your printer icon on your desktop. 
  • Right click on your Printer and select Printing Preferences. 
  • Click on the Maintenance tab 
  • Select Head Cleaning 
  • Click Start 
  • The cleaning cycle will take a few minutes to complete. Once the power light on the printer's control panel has stopped flashing, click Print Nozzle Check Pattern to verify that the cleaning was effective. 
  • Click Print 
Once the Nozzle Check Pattern has been printed, you may select finish or you may also perform another cleaning cycle if you are not satisfied with the print quality.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print on the Nozzle Check Pattern is satisfactory, you may return to the document you wish to print and resume printing.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print quality is unsatisfactory after performing the cleaning cycles, let the cartridges sit in your printer for 1 hour.

After 1 hour has passed, try your print again. You may find it helpful to remove the cartridge from the printer and reinstall at this point, but please confirm that the print is still poor after the cartridge has sat undisturbed for an hour before trying this step.

If you have performed all these steps and the print quality is still unsatisfactory, you may need to replace your inkjet cartridge.

Always be sure to follow the Manufacturer's instructions to gently shake a replacement cartridge 4-5 times while still in the sealed bag before installing into your printer as this may help to prevent errors such as the one you have experienced.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you will need to ensure that you have removed the pull tab that covers the ink port.

If there are silver seals and no pull tab, please ensure that both seals have been punctured by the printer.

If you have already removed the pull tab or if both seals have been pierced, you may need to perform a cleaning cycle to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer's LCD screen.

If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • Using the arrow keys, scroll to setup and press OK 
  • Scroll to Maintenance and press OK 
  • Next scroll to Head Cleaning and press OK 
  • Press Start to begin the cleaning. 
  • The cleaning cycle will take a few minutes to complete. 
  • Once the cleaning cycle has finished, scroll to Nozzle Check and press OK to verify that the cleaning was effective. 
  • Press Start 

Once the Nozzle Check Pattern has been printed, you may return to the document you wish to print and resume printing. Or you may also perform another cleaning cycle if you are not satisfied with the print quality.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print quality is unsatisfactory after performing the cleaning cycles, let the cartridges sit in your printer for 1 hour.

After 1 hour has passed, try your print again. You may find it helpful to remove the cartridge from the printer and reinstall at this point, but please confirm that the print is still poor after the cartridge has sat undisturbed for an hour before trying this step.

If you have performed all these steps and the print quality is still unsatisfactory, you may need to replace your inkjet cartridge.

Always be sure to follow the Manufacturer's instructions to gently shake a replacement cartridge 4-5 times while still in the sealed bag before installing into your printer as this may help to prevent errors such as the one you have experienced.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip you may use a pencil eraser. 
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
  • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

Always be sure to follow the Manufacturer's instructions to gently shake the cartridge in the bag 4-5 times before installing a new cartridge, but never shake a cartridge after it has been installed into the printer.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that "you have not installed genuine Epson ink cartridges", you will need to continue through this error message to allow your printer to print your document.

Simply press the "continue" button. Do not press the "cancel" button.

Click Finish on the next screen.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

If the chip is missing, you should return the cartridge to its place of purchase.

If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

  • To clean the chip you may use a pencil eraser. 
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or, you may use any type of lint free cloth such as a coffee filter. 
  • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
  • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.

  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

Always be sure to follow the Manufacturer's instructions to gently shake the cartridge in the bag 4-5 times before installing a new cartridge, but never shake a cartridge after it has been installed into the printer.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you will need to ensure that you have removed the pull tab that covers the ink port.

If there are silver seals and no pull tab, please ensure that both seals have been punctured by the printer.

If you have already removed the pull tab or if both seals have been pierced, you may need to perform a cleaning cycle to improve the quality of your print.
  • To perform a cleaning cycle, find your printer icon on your desktop. 
  • Right click on your Printer and select Printing Preferences. 
  • Click on the Maintenance tab 
  • Select Head Cleaning 
  • Click Start 
  • The cleaning cycle will take a few minutes to complete. Once the power light on the printer's control panel has stopped flashing, click Print Nozzle Check Pattern to verify that the cleaning was effective. 
  • Click Print 
Once the Nozzle Check Pattern has been printed, you may select finish or you may also perform another cleaning cycle if you are not satisfied with the print quality.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print on the Nozzle Check Pattern is satisfactory, you may return to the document you wish to print and resume printing.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print quality is unsatisfactory after performing the cleaning cycles, let the cartridges sit in your printer for 1 hour.

After 1 hour has passed, try your print again. You may find it helpful to remove the cartridge from the printer and reinstall at this point, but please confirm that the print is still poor after the cartridge has sat undisturbed for an hour before trying this step.

If you have performed all these steps and the print quality is still unsatisfactory, you may need to replace your inkjet cartridge.

Always be sure to follow the Manufacturer's instructions to gently shake a replacement cartridge 4-5 times while still in the sealed bag before installing into your printer as this may help to prevent errors such as the one you have experienced.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you will need to ensure that you have removed the pull tab that covers the ink port.

If there are silver seals and no pull tab, please ensure that both seals have been punctured by the printer.

If you have already removed the pull tab or if both seals have been pierced, you may need to perform a cleaning cycle to improve the quality of your print.

This video will show you an example of how to perform a cleaning cycle through your printer's LCD screen.

If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance.

  • Using the arrow keys, scroll to setup and press OK 
  • Scroll to Maintenance and press OK 
  • Next scroll to Head Cleaning and press OK 
  • Press Start to begin the cleaning. 
  • The cleaning cycle will take a few minutes to complete. 
  • Once the cleaning cycle has finished, scroll to Nozzle Check and press OK to verify that the cleaning was effective. 
  • Press Start 

Once the Nozzle Check Pattern has been printed, you may return to the document you wish to print and resume printing. Or you may also perform another cleaning cycle if you are not satisfied with the print quality.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print quality is unsatisfactory after performing the cleaning cycles, let the cartridges sit in your printer for 1 hour.

After 1 hour has passed, try your print again. You may find it helpful to remove the cartridge from the printer and reinstall at this point, but please confirm that the print is still poor after the cartridge has sat undisturbed for an hour before trying this step.

If you have performed all these steps and the print quality is still unsatisfactory, you may need to replace your inkjet cartridge.

Always be sure to follow the Manufacturer's instructions to gently shake a replacement cartridge 4-5 times while still in the sealed bag before installing into your printer as this may help to prevent errors such as the one you have experienced.
Information
Close
Information
Close
Information
Close
 
Close

 
Close

INFORMATION
Close

Are you sure you want to logout?

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Multiple choices
Close

This item is available for outright sale or exchange purchase.
Please choose below.

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Loader
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Information

Your session will expire in 5 minute(s).


Information

Your session has expired. You will now be redirected back to the home page.


Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Upload logo
Close

Allowed format: .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Shipping Information ()

Close
INFORMATION
Close

Your document is being created. Please wait until the download initiates.


Terms and Conditions
Close
Shipping Address List View all addresses
Close
Click on the address to select it
Add new Ship-To address
Close
* Required Field
How it works?
Close

Click the green button "Create New User"

Fill out the form fields for your new user. Select which permissions your new user should have and assign a username and password. Click Save. You will receive an e-mail confirming the new user has been set up successfully. Follow this procedure to set up each new user.

After you have created a new user, the new user will receive an automated email with their new user name and password. They will be given instructions on how to change their password if they would like to choose their own. However, as an administrator, you will always have access to delete/edit users, view their profile information (including their password) and change their permissions.

If you need to edit a user, there are links beside each user to edit or delete the user’s profile.

If you delete a user, the user will now appear on the Deleted Users Page and you can Re-Activate at any time if you need to do so.

Clover Video
Close
Information
Close

Upload Terms and Conditions
Close

Allowed format: .pdf; Max file size: 5MB.

Upload Customer Logo
Close

Allowed format: .jpg, .jpeg, .png, .bmp; Max file size: 5MB.

Resubmit Historical Usage File
Close

Allowed Formats: .xls, .xlsx; Max file size: 5MB.

Warning 
Close

Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning 
Close

Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning
Close