Clover Imaging Remanufactured Cyan Ink Cartridge for HP 11 (C4836AN)

  • HP - C4836AN
  • HP - C4836AN
  • HP - C4836AN
  • Additional image
  • Additional image
  • Additional image

Clover Imaging Remanufactured Cyan Ink Cartridge for HP 11 (C4836AN)

  • 114225
  • Inkjet
  • HP - C4836AN
  • 11
  • Cyan
  • 1,750 Pages *

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be contacted about purchasing Clover products.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Additional Product Information

Technical Specifications

Compatible with following printers:

HP
  • Business Inkjet 1000
  • Business Inkjet 1100d
  • Business Inkjet 1100dtn
  • Business Inkjet 1200
  • Business Inkjet 1200d
  • Business Inkjet 1200dn
  • Business Inkjet 1200dtn
  • Business Inkjet 1200dtwn
  • Business Inkjet 2200
  • Business Inkjet 2200se
  • Business Inkjet 2200xi
  • Business Inkjet 2230
  • Business Inkjet 2250
  • Business Inkjet 2250tn
  • Business Inkjet 2280
  • Business Inkjet 2280tm
  • Business Inkjet 2300
  • Business Inkjet 2300dtn
  • Business Inkjet 2300n
  • Business Inkjet 2600
  • Business Inkjet 2600dn
  • Business Inkjet 2800
  • Business Inkjet 2800dt
  • Business Inkjet 2800dtn
  • Color Inkjet cp1700
  • Color Inkjet cp1700d
  • Color Inkjet cp1700ps
  • Designjet 100
  • Designjet 100 Plus
  • Designjet 10PS
  • Designjet 110
  • Designjet 110 Plus
  • Designjet 120
  • Designjet 20PS
  • Designjet 50PS
  • Designjet 70
  • Officejet 9110
  • Officejet 9120
  • Officejet 9130
  • Officejet Pro K850

Product Box Dimensions:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.4 lbs

Videos and Downloads

Product Related Videos:

  • High Quality - Environmentally Friendly Inkjet Printer Cartridges

Product Related Downloads:

Product Troubleshooting

Possible Troubleshooting

The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, reinstall your cartridge into the printer (making sure it clicks into place) and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

To do so, peel back the product label to reveal the OEM label.

Confirm that the supplier label and the OEM labels match.

If the labels do not match, your cartridge has been packaged incorrectly and will not fit into your printer properly. You will need to return your cartridge to the place of purchase.

If the labels do match, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that your cartridge is expired, the cartridge will not function and should be replaced.

If you have just installed the cartridge, please contact the seller of your remanufactured inkjet for a replacement.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you may need to clean your cartridge print head in order to improve the quality of your print

Please attempt the following procedures in order to do so. Please keep in mind that this process may vary by printer and that you may also consult your printer’s user manual for instructions on performing a cleaning cycle.

  • Select the HP Solution Center link on your desktop. You may find this by going to the Start Menu on your PC. 
  • Select All Programs 
  • Select HP from the menu that appears. 
  • Select HP Solution Center from the menu 
  • Next, select Settings. 
  • Then choose Printer Tool Box located under the printer settings category. 
  • Next, you will select “clean print heads” 
  • Select Clean 
  • You will observe your printer performing a cleaning cycle. 
  • Once the cycle is complete, your printer will print a test page. 

Once the test page has been printed you may select DONE, or you can also perform another cleaning cycle if you are not satisfied with your test page.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridges.
If you encounter an error message stating "User Intervention Required", there may be a simple solution to fix this.

  • Restart both your printer and computer and attempt your print again

If that does not resolve the error, please try to clear the Print Spooler:

  • Search Windows for Services, and then click Services in the list of results. (The Search Bar can be found by clicking the Windows button in the lower left corner of the screen.)
  • Select Print Spooler from the alphabetical list.
  • Right-click Print Spooler and choose "Stop".
Next close the Services window and use Windows Explorer to go to C:\Windows\System32\Spool\PRINTERS.

  • Open Windows Explorer (the icon that looks like a file folder).
  • Select the (C:) drive in the left pane under "Computer".
  • Double-click the Windows folder.
  • Scroll down and open the "System32" folder.
  • Open the "spool" folder and delete all files inside the PRINTERS folder.
  • Restart your computer and attempt your print again 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing".
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, reinstall your cartridge into the printer (making sure it clicks into place) and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.

Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.

If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

If your cartridge is still not fitting into the machine, you will need to confirm that you have been given the correct cartridge for your printer.

To do so, peel back the product label to reveal the OEM label.

Confirm that the supplier label and the OEM labels match.

If the labels do not match, your cartridge has been packaged incorrectly and will not fit into your printer properly. You will need to return your cartridge to the place of purchase.

If the labels do match, please make sure that you are installing your cartridge into the correct location in the printer. Please consult your printer’s user manual to learn how to correctly install your remanufactured inkjet cartridge.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error message stating that your cartridge is expired, the cartridge will not function and should be replaced.

If you have just installed the cartridge, please contact the seller of your remanufactured inkjet for a replacement.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you encounter an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

Begin by removing the cartridge that is causing the error from its cradle.

Once the cartridge is removed, confirm that there is a chip intact.
  • To locate the chip, look at the bottom of the cartridge. 
  • The chip should be located on the left side. 
  • If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase. 

Once you have confirmed that the chip is in the proper location, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you will want to reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
The cartridge and printer used in this video may not look identical to yours, but the same procedures used in this video may be used for the cartridge you have chosen to troubleshoot.
If you have printed a document and are unsatisfied with the print quality, you may need to clean your cartridge print head in order to improve the quality of your print

Please attempt the following procedures in order to do so. Please keep in mind that this process may vary by printer and that you may also consult your printer’s user manual for instructions on performing a cleaning cycle.

  • Select the HP Solution Center link on your desktop. You may find this by going to the Start Menu on your PC. 
  • Select All Programs 
  • Select HP from the menu that appears. 
  • Select HP Solution Center from the menu 
  • Next, select Settings. 
  • Then choose Printer Tool Box located under the printer settings category. 
  • Next, you will select “clean print heads” 
  • Select Clean 
  • You will observe your printer performing a cleaning cycle. 
  • Once the cycle is complete, your printer will print a test page. 

Once the test page has been printed you may select DONE, or you can also perform another cleaning cycle if you are not satisfied with your test page.

Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing.

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridges.
If you encounter an error message stating "User Intervention Required", there may be a simple solution to fix this.

  • Restart both your printer and computer and attempt your print again

If that does not resolve the error, please try to clear the Print Spooler:

  • Search Windows for Services, and then click Services in the list of results. (The Search Bar can be found by clicking the Windows button in the lower left corner of the screen.)
  • Select Print Spooler from the alphabetical list.
  • Right-click Print Spooler and choose "Stop".
Next close the Services window and use Windows Explorer to go to C:\Windows\System32\Spool\PRINTERS.

  • Open Windows Explorer (the icon that looks like a file folder).
  • Select the (C:) drive in the left pane under "Computer".
  • Double-click the Windows folder.
  • Scroll down and open the "System32" folder.
  • Open the "spool" folder and delete all files inside the PRINTERS folder.
  • Restart your computer and attempt your print again 

If you have attempted both of these procedures and you encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.

If you need to print right away and this troubleshooting did not solve the problem with your cartridge, please select the option entitled "One Cartridge Printing".

* Page yield based on 5% page coverage prints.

Yield increase
Close
Yield increase

Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.

Recycled Content Certified
Close
Recycled Content Certified

GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.

Low-Emissions Toner
Close
Low-Emissions Toner

Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.

Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Close
Information
Close
Payment Information

To use the Clover Recycling Center, you must provide a credit card which may be charged on a monthly basis to offset program costs. Charges will vary depending on the contents of your return shipments.

View program terms and conditions

* Required Field
Notification
 
Close

 
Close

INFORMATION
Close

Press OK to switch region to Clover Imaging Group

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.

Error retrieving data
Close
Thank you
Close
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Terms and Conditions
Close
Clover Video
Close
Warning
Close
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy
PROMOTION DETAILS
Close